Its reinforced steel frame incorporates a
90 kg weight stack, a pulley system at different heights, multi-grip press arms
and a dedicated leg station. This configuration lets you train the main muscle
groups without needing a separate machine for every exercise.
Designed for demanding home users and
semi-commercial environments, the MG2000 offers a practical way to plan varied
strength sessions, adjust resistance and train consistently.
Train your whole body on one machine
Exercise variety is one of the MG2000's key
strengths. Its combination of pulleys, articulated arms and leg station enables
upper- and lower-body workouts using different directions of movement.
Chest and shoulders
The press station features articulated arms
with multiple grip heights. It allows pressing movements that primarily target
the chest and shoulders along a guided movement path.
Back
The high pulley, fitted with a long lat
pulldown bar, enables vertical pulling exercises. The mid and low pulley
positions add options for rows and other back exercises.
Biceps and triceps
The various pulley outlets allow arm curls
and extensions, adapting the range of motion and resistance to the chosen
exercise.
Legs
The front station with padded rollers
allows leg extensions for the quadriceps and leg curls for the hamstrings. This
makes it possible to include targeted lower-body training without changing
machines.
Abs and accessory exercises
The pulleys also support accessory
exercises for the abs, shoulders and hips, expanding the range of available
movements.
You can organise sessions by muscle group,
alternate upper- and lower-body workouts or combine different stations within
the same routine.
A 90 kg weight stack to adjust your workout
Progress starts with the right resistance
and controlled technique.
The MG2000 features a metal-plate weight
stack with a nominal load of 90 kg, selectable in 5 kg increments using a
magnetic selector pin.
This lets you adjust resistance to suit
each exercise. Not every movement needs the same load: select lighter weights
for accessory exercises and increase them gradually where appropriate.
The system makes changing weights easy
without handling external weight plates, helping you organise your sessions.
It is important to distinguish weight-stack
mass from the effective resistance at each station. The 90 kg refers to the
nominal weight of the plates; the force delivered to the handle may vary
depending on the pulley arrangement used.
Pulleys at different heights for more training options
The pulley configuration is one of the
MG2000's most versatile features.
The machine combines high, mid and low
pulleys with dual side cable outlets, providing different points from which
resistance can be applied.
This allows you to change the direction of
pull and choose exercises suited to different muscle groups.
• High pulley: especially useful for lat
pulldowns and other overhead pulling movements.
• Mid pulley: enables pulling exercises
from an intermediate height.
• Low pulley: expands the options for
seated rows and arm exercises.
• Side cable outlets: support accessory
movements with compatible single-hand grips.
The variety of cable outlets makes it easy
to combine different exercises without relying on a single movement station.
Multi-grip press: controlled upper-body training
The MG2000 includes a press station with
articulated arms and multiple grip positions.
This configuration allows you to focus on
the chest and shoulders while following a path defined by the machine's
mechanism.
The arms have a positioning knob that lets
you adjust the setup to the exercise.
This station helps you focus on technique,
movement control and progressive resistance.
Before each set, check that the arms and
adjustment mechanisms are securely locked in place.
A dedicated station for leg training
The MG2000 is not limited to upper-body
workouts.
Its front module includes padded rollers
for two common strength-training exercises:
Leg extension: a knee-extension movement
that targets the muscles at the front of the thigh, especially the quadriceps.
Leg curl: a knee-flexion exercise primarily
targeting the muscles at the back of the thigh, especially the hamstrings.
This station complements the pulley and
press functions, helping you build more varied routines on one machine.
Adjustments to find your ideal training position
Correct positioning is important for
controlled exercise execution.
That is why the MG2000 features a
height-adjustable seat with a locking knob, press arms with different grip
heights and padded support surfaces.
The seat allows you to change your sitting
height, while the backrest provides support for exercises that require it.
Padded rollers on the leg station complete
the support points.
Before every workout, adjust the machine to
your body, choose a suitable load and check that all adjustment mechanisms are
secure.
Reinforced steel frame and semi-commercial construction
The MG2000 is built with a reinforced steel
frame and protective shrouds around the weight stack.
With a net weight of 225 kg, it is a
stationary machine that must be installed in a stable, suitable location.
Its semi-commercial classification makes it
suitable for individuals seeking comprehensive strength equipment and for
managed shared facilities, including fitness rooms in hotels, workplaces and
residential buildings.
The frame combines multiple stations to
make efficient use of the available space without installing several separate
machines.
Dimensions and space requirements
The MG2000 dimensions are:
• Length: 190 cm.
• Width: 130 cm.
• Height: 210 cm.
• Net weight: 225 kg.
• Maximum user weight: 130 kg.
For proper installation, allow 1 metre of
clearance around the machine and check that the ceiling is high enough for
assembly and use.
Install it on a solid, level surface.
The MG2000 is not foldable and has no
transport wheels. Choose its permanent position before starting assembly.
What is included with the MG2000?
The multi-gym incorporates the following
functional components:
• Reinforced steel main frame.
• 90 kg metal weight stack with magnetic
weight selection.
• Cable and pulley system with multiple
workout outlets.
• Long lat pulldown bar.
• Articulated multi-grip press arms.
• Leg extension and leg curl station.
• Adjustable seat and padded backrest.
• Padded support rollers.
• Weight-stack protective shrouds.
• Illustrated exercise chart.
The structural, mechanical and support
components require assembly. Refer to the assembly documentation for the exact
inventory of supplied parts and accessories.
Assembly and maintenance: look after your equipment to keep progressing
Installation involves assembling the frame,
guide rods, weight plates, seat, arms, cables, pulleys and protective shrouds.
Given the machine's weight and design, two
people are recommended for assembly. Follow the official instructions.
To keep it working properly, regularly
inspect the fasteners, cables and moving parts, and keep contact surfaces
clean.
Clean according to the manufacturer's
instructions and lubricate moving parts periodically, at least once a year, as
stated in the manual.
Your training. Your effort. Your progress.
The ION fitness MG2000 brings together the
features needed for varied strength training: a nominal 90 kg weight stack,
multiple pulley stations, a press station, a leg station and construction
intended for semi-commercial use.
A machine for those who value consistency,
want to plan workouts with different exercises and seek equipment that supports
their progress.
Because progress is not just about lifting
more weight; it is about training with purpose, good technique and consistency.
ION fitness. Train. Grow. Enjoy.